How to make hair ties with your own hands?

1. We fold the two edges of the fabric from the inside and stitch along the edge on the sewing machine. The indent should be no more than 1 cm.
2. Tuck the fabric in the middle and hold it in this position with your finger as shown in the photo below.
3. Fold the remnants of the fabric inside. That is, we need to fold the strip of fabric in half.
4. We start to stitch on the machine from the side of the sewn part along the edge. It is important to be careful not to sew the folds inside. As you sew, you need to get the inside of the fabric and continue to scribble on the typewriter.
5. Three centimeters before the beginning of the line you need to leave a small hole. Later through it we will pass the gum.
6. Turning the fabric on the front side.
7. We pass inside the gum.
8. Tie her up.
9. Stitch the remaining hole on the machine so that the hair tie is completely stitched along the entire length.
10. Straighten the gum. Thus, the hair ornament is ready.

Creating hair ties is not only exciting, but also interesting. Such handmade jewelry will set you apart from the crowd, since no one else will have such an accessory.

After all, this is an author's work.

And the possibility of using different materials to create a hair tie will allow you to diversify your hairstyle: make a sloppy bunch, a regular tail or an elegant horse tail.

Making jewelry

• Work should begin with the manufacture of individual parts. From lilac and violet ribbons it is necessary to prepare 4 segments each, 16 cm long.

• Having taken one piece of each color in your hands, you should fold their wrong sides together.

• Having a purple detail on top, you need to connect the slices of double parts. It is important not to twist and turn the tape. The result is a long and narrow loop.

• Continuing to hold the combined slices with your fingers, it is necessary to bend the upper part of the eyelet, folding the part in half.

• In this state, the item must be secured with a pin. And immediately you need to prepare a second such detail, completely repeating each action.

• The received two parts should be stitched manually with an ordinary needle with a threaded thread. Need to sew small stitches, trying to simultaneously capture all layers of the tape. In this case, both blanks must be stitched with one thread, without breaking it.

• Next, the resulting line should be strongly tightened, collecting the edge of the tape in small folds. After that, you need to make a few fixed knots with a needle and cut off the excess thread.

• Now, with the help of a lighter, carefully cut the tape slices carefully and carefully.

• It turned out half the bow, now you need to do the second part, completely repeating the previous steps.

• The resulting halves should be joined together, sticking together the stitching parts.

• Now the purple ribbon should be twisted into a tube and with a glue wrap around the fastening point of the two halves of the bow.

• From the seamy side in the center of the bow you need to attach the prepared gum.

• It remains to supplement the middle of the bow with a purple cabochon and smooth the edges of the ribbons.

Lush and beautiful bow is ready!

Today, I will show you how to make a flower out of satin ribbon. You can decorate with this flower the same elastic for hair, hairpin, gift wrapping.

To create rezinochki need:

• glue gun,
• light pink cabochon
• scissors,
• scrunchy,
• a circle of felt
• a satin ribbon not exceeding 25 mm wide, of lilac color,
• pink satin ribbon 40 mm wide,
• ribbon of satin lilac shade not less than 50 mm wide,
• lighter.

Consciousness of the flower from the tape for rezinochki with step by step photos

• From a tape of lilac color 5 cm wide should prepare squares with sides of 50 mm, in the amount of 18 pieces.

• From the pink ribbon you need to make squares with a side of 4 cm. Such details will require 12 pieces.

• From the narrowest of the prepared tapes you need to make 11 parts.
• Now you can start creating petals from all kinds of prepared squares. Taking one square, it must be neatly folded into a triangle, bending the part along its diagonal.

• Positioning the fold of the fold horizontally to yourself, you need to tuck one edge to the middle and squeeze with your finger.

• Then you need to repeat the action, but with the second side of the bend.

• It turned out a square billet, the two sides of which consist of connected cuts. They should be carefully singed with fire so that each layer of the tape is processed and soldered together.

• Carefully repeating each step, it is necessary to process the remaining large lilac squares.

• Then repeat processing with pink details, getting the details a little smaller.

• Special care must be taken when processing the smallest squares of lilac ribbon. It is important to ensure that the tape is not deformed and not lost, and the edge remains even.

• Now you can combine the details in the decoration. First you need to put together large parts. It is necessary to glue, putting them one on another, slightly hiding the scorched cut under the bend strip.

• Gradually adding petals, it is necessary to form a circle and fasten the first tier of the decoration with the last detail. The result will be a circle of 18 large lilac petals.

• Then you need to make a circle of pink details of medium size. They should also be glued together as lilac petals. The result is a circle of 12 parts.

• And there remain only small details, from which it is required to make the same circle, but already from 11 petals.

• Now you need to join together all the prepared circles. It should start with the biggest, gradually moving to the smaller. First, you need to glue a large lilac circle and pink, combining their centers.

• Then you need to attach a small lilac circle, placing it strictly in the center of the pink circle.
• On the underside of the circles, you need to attach a small circle of felt that will hide the intersection of the circles and their details.
• In the center of the attached mug, you should attach the prepared hair tie.

• It remains to add a lilac-colored cabochon on the front side of the adornment and correct the folds of the petals.

The decoration is ready and now you know how to make a flower from a satin ribbon! You can watch the video.

Read my tips on what else can make ribbons with your own hands.

Give each other gifts on the day of the holiday and just for no reason.

Sincerely, Natalia Krasnova.

Jack Thread (Halloween): Step by Step Guide

Many girls have seen the cartoon "Nightmare before Christmas." The main hero of this picture is Jack.

In the manufacture of gum "Jack" girl uses these materials:

• standard thin rubber band for hair,
• cosmetic pens (for face),
• other necessary fixtures.

When creating a jack jack, a woman performs the following actions:

• attaches to the hair accessories and ribbon bows,
• then he makes Jack's face — a circle of cloth that the girl stuffs with a padding polyester and paints — and the gum “Jack” is ready!

Rubber thread "Hare ears" of beads, felts, beads

For the manufacture of gum "Bunny ears" girl makes the pattern:

• picks up a base for rubber,
• tying the ears with a knot around the base - and the “Bunny ears” rubber is ready! A girl with such an elastic band on her head looks springy femininely cute.

Photos of other rezinochek own hands

In addition to the above homemade products, girls with their own hands make the following rubber bands:

Gum-bow looks very attractive and gives the girl romance

Also many funny rezinochek can be made of felt - such products also adorn girls.

As a result, each woman can independently make one or another hair tie - to accomplish a creative feat and significantly transform her appearance.

All materials are provided for review. Before using recommendations concerning the health of your hair, we recommend that you consult with a specialist. Use of material is permitted only with the active hyperlink to the site.

Do-it-yourself gum made of satin ribbons - how to make a beautifully beautiful kanzashi decoration with a photo

Modern needlewomen make such skilful jewelery that they can only wonder. They are able to make jewelry for the hair, which will emphasize the beauty of hair, in several different techniques. Satin ribbons for rubber bands are considered to be a convenient material, because it is possible to create from them from a flower to a decoration for a bunch using simple techniques.

Craftswomen are able to do rezinochki their own hands from ribbons in several techniques, which, when carefully considered, become quite simple. The main thing in this business is to learn basic skills, follow the schemes and master classes and apply your imagination to make a beautiful decoration, distinguished by individuality and spectacular appearance.

The basis of the manufacture of rubber bands is the technique of weaving, folding and gathering elements into one large pattern. For beginners it is better to take the basic skills as a basis, learn them, and then begin to complicate them.

Even simple rezinochki can look spectacular on the girl's hair, if they skillfully decorate. Embroidery, weaving, beads, beads, sequins are the decoration options for finished products.

You can try a variety of decoration options to make beautiful decorations.

Materials for making rezinochek are satin ribbons of different colors and shades, beads, beads, decor elements.

From auxiliary tools you will need glue for textiles, scissors, glue gun, a source of fire (a candle lighter) and skillful hands. Sometimes craftswomen take ready rezinochku, bought in a regular store, and decorate it in their own way.

In this case, you will need a base where the elements will be fixed - cardboard, metal hairpins, plastic crabs.

Japanese kanzashi art is considered a well-known technique of creating gum from satin ribbons. To make a beautiful children's accessory for hair resembling dahlia or chamomile, girls need to follow a master class:

1. Make 16 square patches of 5 * 5 cm in size from a satin or silk cut, hold a lighter along the edges so that the threads do not come out. Repeat for a different color (inner petals).
2. For the outer row of petals, each square should be bent diagonally, repeat, cast a corner with fire. For the inner row of petals squares are bent diagonally three times.
3. Fold the smaller billet inside large, glue.
4. Make 12 single-layer blanks for additional decoration.
5. From thick cardboard cut 2 circles with a diameter of 3.5 cm and 2.5 cm, glue over the fabric.
6. Each double-layer petal is glued to a large base in a circle. Repeat for the second tier. To a smaller base stick single-layer petals. Glue 2 bases together.
7. Decorate with beads, glue the resulting flower on a hairpin or crab.

Hair bands made of ribbons of different widths

Spectacular and voluminous obtained gum from satin ribbons with their own hands, made of a material of different widths. There is a master class for making an accessory:

1. Cut a rectangular blank of cardboard 9 * 16 cm, draw a horizontal line in the middle. To wind a ribbon on it.
2. Remove the coil without damaging the coils, sew the middle, pull off to the formation of a bow.
3. Repeat the technology for the manufacture of a bow of a different material and a narrower tape.
4. From a fabric of a contrasting color, cut pieces of the same length and width as the resulting bow, sing the edges.
5. Collect all the items on the thread.
6. Cut a cardboard circle, covered with a cloth, sew to rubber band.
7. To glue a bow on a circle with a glue gun, decorate with small beads, rhinestones, buttons or pebbles.

For the manufacture of gum from satin ribbons with their own hands, decorating the bun-bundle, girls will need to follow the step by step instructions

1. 6 pieces of green ribbon 4 * 2.5 cm incise the dome, singed from 2 sides to create a wave - it will be leaves. Bend the bottom edge in two places, glue in the center to obtain a concave flat part.
2. 12 pieces of white tape 4 * 2.5 cm and 5 pieces of 3.5 * 2.5 cm cut in a semicircle, scorch, glue into a droplet.
3. Glue 5 blanks together by overlapping each other, decorate with stamens.
4. Repeat for 14 pink petals of pieces 4.5 * 2.5 cm.
5. Round the first layer of white parts, glue the remaining petals, make the second layer around the circle of pink elements. Glue the leaves.
6. Make 5 such blanks.
7. 4 pink pieces 10 * 5 bend in half, glue the ends with a fold, connect with a bow. Repeat for 2 white blanks 9 * 5 cm.
8. 2 white ribbons 8.5 * 5 cm and pink 9 * 5 cm fasten with an overlay of white on a pink layer, form a fold, decorate the bottom with beads. Glue the bow, disguised middle.
9. Behind the Bantu and flowers, glue the felt circles with a diameter of 3.5 and 2.5 cm, sew all the elements on the stitched lace elastic. Decorate the bun.

Ribbon bands with bows

Effectively on the hair look in the form of bows, which can be made by following the instructions:

1. Take 2 ribbons 2.5 and 0.8 cm wide, 1 meter long, 1 ribbon 8 mm wide and 50 cm long.
2. Make 2 cardboard templates in the form of a letter P of 6 and 8 cm in size, cut the edge of the wide ribbon along the slant, lay in a large pattern so that the cut and 2 folds are from each edge.
3. Fasten the ribbon in the center with pins, sew a “forward needle” with a seam, assemble, fix.
4. Repeat for the second bow, sew together, attach the bead in the middle.

Get acquainted with the master classes, how to make crafts of ribbons do it yourself for beginners.

Beginners skilled workers can try to make gum from satin ribbons, repeating the master classes.

For convenience, there are instructions with photos and descriptions, as well as video materials, which clearly demonstrate the tricks of making jewelry.

Following the instructions, you will receive interesting hair accessories that you can wear yourself in any hairstyle (braids, buns, tails) or use as a gift.

How to make a gum of three ribbons

All the girls who have a curly length more than the "haircut under the boy," more often or less often like to go with hairstyles, and here you can not do without rubber bands.

Of course, in the arsenal of each lady there are not a dozen of such hair ornaments, but sometimes you want something original and unusual, which is why the question arises how to make hair bands with your own hands.

Some interesting ideas you will find in this article.

What to do gum for hair?

The beauty of this idea is that in order to make a hair tie with your own hands, you can use any available materials without any restrictions:

• fabrics - leather, felt, satin, cotton, and segments of any size, because you don’t need much for such a decoration and you can sew it not from one but from several patches,
• thin, inexpensive, purchased rubber bands or wire,
• beads, stones, a hem and everything else you can think of for decoration;
• plastic.

Of course, the tools and materials needed will also be needed to hold all this together into one whole:

• thread,
• needles
• scissors,
• metal small clamps and rivets,
• wire,
• glue.

“Flower Astra”

To make such a hair tie, a thin fabric of any shade is suitable. The manufacturing process is very simple:

1. Cut a strip 5 cm wide, up to 10-20 cm long (depending on how lush you want to make a flower).
2. On one side, cut along the entire length of the strip on the fringe principle - these will be petals.
3. Take a needle and thread and collect the entire strip on the thread from the side where there are no cuts.
4. Tighten it so that it turns out a circle with petals from the outside.
5. Tie a thread and sew the edges of the fabric.
6. In the center you can insert another such strip of this or any other color, or decorate with a bead of a suitable size.
7. On the reverse side attach to the flower a thin elastic band, which you will tie strands with. For this purpose, suitable rivets or a small piece of cloth.

Important! As you can see there is nothing complicated. Regarding the color - choose for yourself, but note that for the blondes pale blue or pale pink is perfect, and brunettes can take a more saturated green or chocolate.

The easiest velvet elastic with their own hands

A wide velvet elastic band always looks very luxurious, and to make it easier than ever:

1. Take 1 or 2 pieces of velvet fabric of any color. If you took 2 pieces, cut out 2 of them of equal size rectangular parts and sew.
2. The width of the rectangles is the width of the decoration, the larger it is, the more magnificent the decoration will be, the length - 25-40 cm so that you can arrange beautiful assemblies.
3. Inside, thread a sturdy, elastic rubber thread that will gather the fabric in waves and keep a bunch of curls well together, and tie it.
4. Sew a hole.
5. Spread the decoration.

Important! This option is perfect for everyday wear. If you make the decoration itself less lush and wide, you can additionally decorate it, for example, with a bow.

To do this, after the base has been sewn, cut a rectangle of velvet, felt or leather. The length of the rectangle is the length of the bow.

Assemble the part in the center to form folds in both directions and fasten it with a rivet to the gum.

“Flower of satin ribbons”

Such decoration is more suitable for girls and will be a wonderful gift or accessory for a holiday. To understand how to make such a hair tie with your own hands, read the instructions below:

1. Take a pink satin ribbon 2.5 cm wide and with a ruler and burner decorate 5 strips 7 cm long.
2. Do the same with a 5 cm wide purple hue ribbon, but the length of the strips should be 10 cm.
3. Roll the ribbons of the same color in half and successively sweep all the details onto one thread and tighten so that a circle is formed (do it on the side where the edges of the tape are connected). So we get one circle of petals.
4. Do the same with ribbons of the second color.
5. Glue one flower to another, and in the middle - a button.
6. On the back of the flower, glue a clip or rubber band that will hold the bundle of strands well.

Elastic plastic

This version of homemade decoration for your hair will be a real find for fashionistas, because you can infinitely show your imagination and make a new model every day. For this:

1. Take a piece of plastic.
2. Cut a rectangular part from it and draw any pattern.
3. To fix the paint, cover the top with a clear lacquer - it is also possible for nails. If you want to make the decoration more elegant, even a varnish with sparkles is perfect.
4. Wait until it dries, and then glue the elastic to the plastic on the back side, into which you will collect your curls.

Important! If you have time and desire to tinker a little longer, you can cut the plastic itself not with a rectangle, but in the form of a specific shape - a hare, a cat, a flower, etc.

Stylish gum

Jewelry made of leather looks very solid and stylish when the elastic band covers a bunch of hair in several circles. If you just take a strip of leather, it will slide off, while delivering constant inconvenience. Therefore, we offer a leather variant that will definitely look extraordinary and firmly hold curls in a bundle:

1. Take a strip of leather - a length of at least 30 cm.
2. Cut the edges “along the oblique”.
3. Mark the center of the strip; fasten the usual thin hair tie in this place with a rivet.

Important! To collect hair, fasten the bundle with a thin elastic band, and wrap a leather strip around the bundle on top, tie it with a knot. This jewelry will look very original and unusual.

Now you know how to make a hair tie with your own hands. Start with the simplest option, try your design possibilities, and then show your imagination, perfecting the decor. Surely, after a few samples, you will want to create more interesting and unusual jewelry to create different hairstyles!

Simple lace rubber thread

In the manufacture of rubber threads with lace woman performs the same procedure as when creating the basis for rubber band. However, in this situation there is one difference: after stitching, the girl does not turn out the blank.

As a result, lace gum gives the girl a little playfulness.

Multi-layer ribbon bow

Ready-made multi-layer bow, made by hand, is no different from its counterpart shopkeeper. But, creating it at home, you can not limit yourself in choosing colors, ornament and material itself.

To create such a bow variation you will need:

• trimming your chosen tape, namely 5 pieces, as shown in the photo,
• a hairpin or elastic band that will attach the product to the hair,
• thread with a needle,
• glue.

The first step is to to makeblanks. It is necessary to bend each of the three ribbons of the same length, which were prepared earlier, so that their edges converge in the center, and sew, as shown in the photo.

Two of the three finished petals are connected to each other by squeezing their centers with a thread. Thus, it turns out a simple four-petal bow.

The longest ribbon should be wrapped so that a bow is formed with two loops and two tails. It should be tightly fastened with threads in the middle.

As a result, you should have three blanks: from two loops, from four petals and a bow with tails.

All of them are fastened together in the listed order with the help of threads and glue for reliability.

To hide the middle stitched thread, the last and shortest shred is used. They just wrapped around the middle of the bow around, and behind the ends of the ribbon sit on the glue.

It remains only to attach with a glue on the back of the product a hairpin, let it dry and wear with pleasure.

Creation technology shown in the video:

Editorial Board

If you want to improve the condition of your hair, special attention should be paid to shampoos that you use.

A frightening figure - in 97% of shampoos of famous brands are substances that poison our body. The main components, due to which all the troubles on the labels are designated as sodium lauryl sulfate, sodium laureth sulfate, coco sulfate. These chemicals destroy the structure of the hair, the hair becomes brittle, lose elasticity and strength, the color fades. But the worst thing is that this stuff gets into the liver, heart, lungs, accumulates in the organs and can cause cancer.

We advise you to abandon the use of funds in which these substances are located. Recently, experts of our editorial staff conducted an analysis of sulfate-free shampoos, where the first place was taken by funds from the company Mulsan Cosmetic. The only manufacturer of all-natural cosmetics. All products are manufactured under strict quality control and certification systems.

We recommend to visit the official online store mulsan.ru. If you doubt the naturalness of your cosmetics, check the expiration date, it should not exceed one year of storage.

Spectacular two-color bow

To create such bows for hair will require:

• Satin ribbon of average thickness of one color
• thin satin ribbon of a different color
• very thin stripes of either color,
• thread.

When creating bows, it is not necessary to stick to the colors and materials described here. After all, you create a masterpiece with your own hands, so you should choose the style too.

From the widest ribbon should get trilayer base. To do this, you need to decide on its diameter and begin to evenly wind the tape, so that you get three full turns. Then fasten the middle thread. More clearly presented below.

Then you need to go to create top bow. It will consist of two layers, one on another. We fasten the ends of the ribbons in the middle and tie the two tiers together so that they do not break up.

The finished bows of this type will include three elements: a three-layer base, a two-tier model and two pieces of the thinnest tape that will hang down.

It remains only to put them on each other and tightly tie up with a ribbon in the middle.

The finished decoration can be hooked on the head with the help of studs or invisibles, and the people around you will never guess that it was made with their own hands.

Another option to create the original bow:

This article was posted: 24 comments

January 6, 2016 | 12:20

I looked at your rezinochki, but wow and did not pick up. Yes, yes it is currently, because my hair is long. What can there be for men?

January 6, 2016 | 13:42

Eh, I'm not strong in men's elastic bands. They are usually made out of the most minimalistic variations - silicone ones, for example.

January 6, 2016 | 21:19

Good and nice rezinochki. I also make the gum myself: from a beautiful fabric, with beads and knitted. An exciting lesson :)

January 6, 2016 | 22:18

I understand you very much, Eugene)) Thank you!

January 6, 2016 | 23:29

I have long hair for my daughter and she often loves to pin them up with rubber bands, great homemade options. Merry Christmas!

January 7, 2016 | 09:31

Thanks love! And Merry Christmas to you!

January 7, 2016 | 02:51

The occupation is really exciting. If you have someone, you need to learn. Thank you, Nastya.

January 7, 2016 | 09:29

January 7, 2016 | 16:46

Bunny's rezinochki just wonderful and bunny ears I also liked. I want to make as a gift.

January 7, 2016 | 19:31

I think the owner will be very happy

January 7, 2016 | 17:01

Very cute))) Especially inspired rezinochka "Jack"))). and bunnies - cuties))) Merry Christmas, Nastya!

January 7, 2016 | 19:33

And merry Christmas to you)) I will be glad to see the fruits of inspiration in the future

February 11, 2016 | 14:13

The class. It is much more interesting to make such rezinochki most, than to buy. The child is very interesting to do something with their own hands)))) Thanks for the ideas.

February 11, 2016 | 21:19

Not at all, Elena))

March 16, 2016 | 00:02

Very good rezinochki. I love creative people, they always have it all going and going well. And what masterpieces come out from under their magical hands. Doo may be and tell me on the blog about the work of their daughters. So temochka was born.

March 16, 2016 | 08:06

Thank you, Galina! Such posts (about their crafts and not only) are very inspiring)

June 28, 2016 | 01:30

Hello Anastasia. I learned to like your gum, they are very beautiful. Recently I sewed my daughter and myself, it turned out very beautifully. Thank you for your ideas. Now I will often read your sites.

June 28, 2016 | 10:01

Greetings Thank you very much for such a sincere response. I would be glad to see you here.

February 13, 2017 | 17:04

just lovely))) I really liked your needlework. My princess’s braids also grew, she loves a lot of rezinochek, but the usual gum and glued middle are unreal, so we decided to create our own collection. To you a question than to stick the middle. just hot melt glue? and just a gun for him ?? Thank you

February 13, 2017 | 18:30

Very happy) You can use the traditional "Moment" (if it is not rhinestones, of course, any silicone is better for them anyway)

Gum from satin ribbons do it yourself: master class with photo and video

Modern needlewomen make such skilful jewelery that they can only wonder. They are able to make jewelry for the hair, which will emphasize the beauty of hair, in several different techniques. Satin ribbons for rubber bands are considered to be a convenient material, because it is possible to create from them from a flower to a decoration for a bunch using simple techniques.

How to make rezinochki of satin ribbons

Craftswomen are able to do rezinochki their own hands from ribbons in several techniques, which, when carefully considered, become quite simple. The main thing in this business is to learn basic skills, follow the schemes and master classes and apply your imagination to make a beautiful decoration, distinguished by individuality and spectacular appearance.

The basis of the manufacture of rubber bands is the technique of weaving, folding and gathering elements into one large pattern. For beginners it is better to take the basic skills as a basis, learn them, and then begin to complicate them. Even simple rezinochki can look spectacular on the girl's hair, if they skillfully decorate. Embroidery, weaving, beads, beads, sequins are the decoration options for finished products. You can try a variety of decoration options to make beautiful decorations.

Materials for making rezinochek are satin ribbons of different colors and shades, beads, beads, decor elements. From auxiliary tools you will need glue for textiles, scissors, glue gun, a source of fire (a candle lighter) and skillful hands. Sometimes craftswomen take ready rezinochku, bought in a regular store, and decorate it in their own way. In this case, you will need a base where the elements will be fixed - cardboard, metal hairpins, plastic crabs.

Kanzashi bands of rubber bands

Japanese kanzashi art is considered a well-known technique of creating gum from satin ribbons. To make a beautiful children's accessory for hair resembling dahlia or chamomile, girls need to follow a master class:

1. Make 16 square patches of 5 * 5 cm in size from a satin or silk cut, hold a lighter along the edges so that the threads do not come out. Repeat for a different color (inner petals).
2. For the outer row of petals, each square should be bent diagonally, repeat, cast a corner with fire. For the inner row of petals squares are bent diagonally three times.
3. Fold the smaller billet inside large, glue.
4. Make 12 single-layer blanks for additional decoration.
5. From thick cardboard cut 2 circles with a diameter of 3.5 cm and 2.5 cm, glue over the fabric.
6. Each double-layer petal is glued to a large base in a circle. Repeat for the second tier. To a smaller base stick single-layer petals. Glue 2 bases together.
7. Decorate with beads, glue the resulting flower on a hairpin or crab.

Gum on a bunch of satin ribbons

For the manufacture of gum from satin ribbons with their own hands, decorating the bun-bundle, girls will need to follow the step by step instructions

1. 6 pieces of green ribbon 4 * 2.5 cm incise the dome, singed from 2 sides to create a wave - it will be leaves. Bend the bottom edge in two places, glue in the center to obtain a concave flat part.
2. 12 pieces of white tape 4 * 2.5 cm and 5 pieces of 3.5 * 2.5 cm cut in a semicircle, scorch, glue into a droplet.
3. Glue 5 blanks together by overlapping each other, decorate with stamens.
4. Repeat for 14 pink petals of pieces 4.5 * 2.5 cm.
5. Round the first layer of white parts, glue the remaining petals, make the second layer around the circle of pink elements. Glue the leaves.
6. Make 5 such blanks.
7. 4 pink pieces 10 * 5 bend in half, glue the ends with a fold, connect with a bow. Repeat for 2 white blanks 9 * 5 cm.
8. 2 white ribbons 8.5 * 5 cm and pink 9 * 5 cm fasten with an overlay of white on a pink layer, form a fold, decorate the bottom with beads. Glue the bow, disguised middle.
9. Behind the Bantu and flowers, glue the felt circles with a diameter of 3.5 and 2.5 cm, sew all the elements on the stitched lace elastic. Decorate the bun.

Video: do-it-yourself satin ribbon

Beginners skilled workers can try to make gum from satin ribbons, repeating the master classes. For convenience, there are instructions with photos and descriptions, as well as video materials, which clearly demonstrate the tricks of making jewelry. Following the instructions, you will receive interesting hair accessories that you can wear yourself in any hairstyle (braids, buns, tails) or use as a gift.

Watch the video: DIY SCRUNCHIES 3 Methods - no sew & sew. JENerationDIY (May 2024).